No redirection after setup wizard

This forum is intended to provide straightforward answers for people trying to use DynFi Firewall Open Source firewalls.
We might also try to answer questions related to competitors firewall such as pfSense® and OPNsense® systems.

Moderator: gregober

Post Reply
dagonix
Posts: 4
Joined: 16 Nov 2021, 15:12

No redirection after setup wizard

Post by dagonix » 16 Nov 2021, 15:15

When you run the wizard after install and if you change the LAN IP address, the redirection will fail because you'll be redirected to the former LAN IP address.
User avatar
gregober
Posts: 236
Joined: 26 Mar 2019, 15:06

Re: No redirection after setup wizard

Post by gregober » 16 Nov 2021, 15:42

Thank you for reporting this problem. We will try to fix it.

[b]Please try to post in the DynFi Firewall section if questions are related to DynFi Firewall. [/b]
dagonix
Posts: 4
Joined: 16 Nov 2021, 15:12

Re: No redirection after setup wizard

Post by dagonix » 16 Nov 2021, 18:09

Sorry, I posted to → Using DynFi Firewalls / General questions. I don't see a section called DynFi Firewall :)

And by the way, the no redirection problem is not only "Wizard related". Even after the setup, if you change the LAN address IP, the redirection does not occur. The same goes if you change the TCP port.

Thank you.
Post Reply